WYRESTORM EX-1UTP-IR-70-AMP HDBASET™ EXTENDER SET WITH INTEGRATED 2.1 AUDIO AMPLIFER KIT

Description

1. Transmits 1080p HD @60Hz and HD multichannel audio from a single HDMI source up to 70m/230ft under recommended conditions*
2. HDMI Input > HDBaseT™ Output, HDBaseT™ Input > HDBaseT™ / HDMI Output
3. Combined HDBaseT™ Transmitter, Receiver, Repeater and Class D audio amplifier – all-in-one
4. Discrete wide-band bidirectional IR control and fully addressable serial control of AMP via signal transmitted together within the HDMI signal over a single Cat5e/6cable to control source, display and AMP
5. RS-232 Commands (Tx, Rx, Gnd) sent with HD Audio & Video contained within single Cat5e/6
6. Centralized RS-232 for firmware updates or third party control with open source integration protocols available for market leading control systems
7. 3:1 Audio switching/receiver – Audio from centralized source via HDBaseT™ Transmitter Audio Return Channel (ARC) or Local Audio Input via 3.5mm
8. AMP may be used centrally with AV source, In-line close to speakers, wall mounted near data connections or locally at display location
9. Fully cascadable up to 7 times to further lengthen transmission and increase your distribution capabilities – 70m/230ft to AMP > a further 70m/230ft to additional AMP x 7
10. HDMI output for direct connection of HD display either in-line to each AMP connected or at the end of the run
11. 2.1 stereo audio at 25w per channel with left/right spring terminal connections for speakers